Gold conductor paste (for etching)
Applicable on alumina substrate
|Smooth surface and dense fired film at 3μm fired thickness||TR-114G|
|High adhesion strength, smooth surface and dense fired film at 3μm fired thickness||TR-1206|
Applicable on glazed substrate (can be used on alumina substrate as well)
|Smooth surface and dense fired film at 2.5μm fired thickness||TR-1202|
|Smooth surface and dense fired film at 2μm fired thickness (without dilution)||TR-1203|
Applicable on glass substrate
Smooth surface and dense fired film at 2μm fired thickness
|Typical Fired Properties||Alumina substrate||Glazed substrate||Glass sub|
|Recommended Firing Temperature||ºC||850||550|
|Resistivity||mΩ/ at 10m||≤4.5|
|Viscosity||Pa · s||350±50||200±40||25±15|
Attention:These pastes and powders are materials for industrial use only. Refer to appropriate MSDS and statement of caution.
Notice:Values in each data are not specified, just representative values.
Learn more about products